Objective
Newbuilding Drill Ships/Semi-Submersible Drilling Units/Flex LNGC/FPSO/LNGC- As structural/welding Inspector, perform works quality assurance and monitoring of shipbuilder’s work for adherence to the project Health, Safety, Security & Environment policies, the mandatory regulations and related conventions/recommendations and the class rules, the project technical specifications and the manufacturer’s recommended procedures services
Experience
Oct.2010 - Present
A.P. Moller-Maersk Group–Denmark
Hull/Outfits Superintendent
-All stages of Hull/structure/piping/outfitting fabrication Inspections/Expediting/Inspection coordination/WPS qualification control
-Monitor and review the submittal of NDT reports and control additional NDT points with welding qualities
-Review and quality control of accuracy dimensions control for piping and hull structure, surveyed measure instruments (SOKKIA)
-Supervisions and inspections of structural, Steel fabrications, Outfitting retrofits, Insulation, Deck machineries, LSA and FFA, WPS control
-Review the construction specification, ITP, OBT plan, NDT plan, Safety plan & alterations
-Monitor the exchanged correspondence for the drawings of his expertise and follow up the closure and execution of generated comments.
-Perform the inspections deviations on building specification, and alterations made to these by later MOM with builder’s Quality standard
-Regular/Unscheduled Auditing material, the spot of unit/sub-assembling blocks manufacturer & sub-contractors
-Improved & Development points having been followed up to solve into joiner crew comments
-Inspections of all sub-assembling blocks, unit-assembling blocks, Pre-erection and Erection of steel construction.
-Attend/supervision of erection, launching & all facilities performance tests, tonnage (GT, DWT & LWT etc.) measurement and quay/sea trial.
-inspections of Hull/machineries-outfitting retrofits
-Coordinate to solve the Nonconformity Item Reports as soon as possible/follow up.
-Inspection/Patrolling/Report of fabrication progressing and following up the alteration, modification, rearrangement of over-rapped points.
-Tank & Pipe Lines Tightness Testing Service control
-Non-Destructive Testing (RT, UT, MT, PT) control service
-Facility Inspection & Safety Audit
-Health & Safety Services
Project Experience
-Jan.’11~Jun. ‘12 7 x 4500TEU CNTR project, ABS, HSHI
-Oct ’10~ Dec.’10 3 x 7450TEU CNTR Project, LR, DSME
Sept.2008~Oct 2010
Bernhard Schulte Group– Germany
Site manager,Chief Superintendent
routing duty of site management, participation of plan approval, solving newbuilding technical matters, relations with concerning departments of shipbuilder and total shipbuilding consultant services
Dec.2005 to Sept.2008
A.P. Moller-Maersk Group – Denmark
Hull/Outfits Superintendent
Jan 2002- Nov.2005
QatarGas Operation (GTT Mark III 135k LNG)-Korea
Structural/Outfitting Inspector
Dec 2000- Jan.2002
Bernhard Schulte Group–Korea
Structural/Outfitting superintendent
Mar.1994~Jun. 2000
Hyundai Heavy Industries Co., Ltd.–Korea
QC/QA General Manager
-Site Manager, Senior inspector of QC/QA, Full stage of Inspections of hull fabrications including Visual & Fusion Welding Qualities, all Steel Fabrication, Dimensional, Outfitting, Coating, NDT & Hydrostatic test with control Health, Safety & Environmental and so on with all kinds of newbuilding project.
Apr.1990~Mar.1994
Hyundai Heavy Industries Co., Ltd.–Korea
Deputy General Manager of hull assembly Dep’t
PIC, Main responsibilities: Management of hull Assembly all kinds of new construction vessels (total 35 vessels) by Hyundai Heavy Industries with control Health, Safety & Environmental and so on (CNTR, VLCC, COT, LPG, COAL/ORE CARRIER, Offshore project, FPSO and so on)
Mar. 1978- Apr. 1990
Sea Going Experience –World Wide
Marine Engineer & Fleet Operating Superintendent
Employee; 3rd Engineer ~ Chief Engineer and Technical Vessels Operation team manager for fleets of CNTR, LPG, BULK, VLCC and LNG carriers
Education
2003 Completed HS&E Officer Course of QatarGas project (Workshop, Forum, Seminar & Yard training course)
1994-98 Ulsan Technical College, Bachelor of Mechanical Engineering and Naval Architect.
1994 Completed Senior Shipbuilding Engineer Course by Hyundai Heavy Ind. HR development education Org.
1992-93 Hyundai Heavy Technical College, Naval Architecture Engineering
1992 Completed Quality Control & Inspection Course, organized by Korean Standard Association
1992 Completed I.S.O Control Management Course by Korean Standard Association
1990 Completed Welding Quality Manager Course by Hyundai Heavy Ind. Welding Technique Institute
1975-78 Pohang No.1 Technical College, Junior Bachelor’s degree of Marine Engineering
Certification
Certified Welding Inspector (CSWIP3.1) TWI, UK - No. 12516 TWI, Sept. 01, 2005
Qualifications of NDT (RT, UT & MT) Level III, ASNT, USA – No. 048357, July. 22. 2005
Certified Welding Inspector (CWI) AWS, USA - No. 04123361 AWS, Dec. 1, 2006
Qualification of Quality Management Engineer - No. 90204170041N, Aug. 11, 1990
Qualification of Industrial Engineer Quality Management – No. 90305900654J, Aug. 30, 1990
Qualification of Construction Mech. Maintenance Engineer-– No. 90406101652D, Nov. 29, 1990
Qualification of Merchant Marine Engineer - No. E2-2814 Oct. 15, 1982
Skils
Highly experienced in all aspects of CNTR, FLNGC, Offshore Oil & Gas Project Management
-Capable of working in team in accordance with tight schedules, budgets and strict Safety Regulations
-Familiar with most international codes and standards- IACS, DNV, ASME, API, ISO 9000-2000, DNV Offshore Codes, and Class Rules- ABS, LRS, DNV & BV etc
-Trained and experienced in Offshore well drill ships (plan approval & Construction supervision) and new-building vessels of all kinds
-Well experienced in offshore structures (plan approval & construction supervision) of production platform, jacket, decks & piles),
-Acted as over 30 years experienced supervisor of shipbuilding industries with all kind of projects.
-Have good reporting, problem solving and interpersonal skills
-Plan approval and site advisory consultancy services for world’s largest LNG Carriers being built at HHI yards
-New ship-building inspection & on site supervision: LNG Carriers, Suez-max & Afra-max Crude Oil Tankers, Container Carriers, Bulk Carriers, Offshore well Drill ships & Offshore well Production Platforms etc.
-Well experienced in both management & technical aspect
-Can oversee the progress of New-building projects in all aspects ranging from management, commercial, procurement, quality assurance, technical etc.
-Scrutiny of technical specifications & plan approval for new-buildings
-Quality Assurance and Quality control expertise.
-Ship inspection, repairs, conversion and dry docking,
-Onboard test & trial, inclining experiment & dead weight measurement, commissioning, sea & gas trials
-Have diplomatic skills and team orientation
-Good analytical & negotiation skills with strong organizational and team building abilities
-Ability to work in a global environment
Over 30 years of diversified expriences as hull supervisor in the owner’s new building projects, shipbuilder’s QC/QA and sea going marine office engineer through the new building hull / structure/ outfits construction supervision works which have been gained wide back grounds new building technical knowledge as such more than 11-year supervisors and 12-year shipbuilding quality control management (Preparing new building specifications & ITP, Site Verification & Supervising, Management control of quality management Dep’t) of all kinds of new building projects in the Hyundai Heavy Industries which Hull, Structure, hull outfitting, accuracy dimensions control, mechanical, piping. With emphasis in the six(6) years as Oil & Gas project’s hull/structural/outfitting QC/QA inspector which is the GTT Mark III Membrane 155k/135k LNG Carrier and Moss Rosenberg type 125k LNG Carrier and 2x Drill Rigs Drillship project. I assure you that my experience in the field will be beneficial to your company.
Given an opportunity, I would be privileged to serve as construction/Structural/Piping inspector with your client offshore unit projects
Please drop me a line or give me a call if you need my services.