Objective
To build a career with an International Organization where work abilities can match with the Job Proficiency, and to be part of a prestigious Institution to achieve this.
Experience
Work Experience
2008 – till date Schahin Oil and Gas (Brazil),
(Yantai Raffles shipyard),China
Naval Engineer (Owner representative) – for Semi submersible/Drill ship
Scope Of work:
Design:
• Checking/Review of basic design and process engineering for Hull fabrication and Outfitting.
• Approving detail design on behalf of Owner.
• Reviewing weight control report from shipyard. According to lightship weight.
• Assisting shipyard engineering team to develop, pipe iso drawing, and structural engineering.
• Reviewing outfitting and detail design according to the owner specification and Petrobras.
• Approving local strength analysis report according to the class requirement and owner.
• Forecasting lightship weight due to weight removal and adding.ect.
• Reviewing stability report according to the loading and environmental condition.
• Reviewing and proposal for technical documents on behalf ship owner requirements.
• Interacting with classification society for design requirements according to owner spec .
• Providing technical guidance and expertise to engineering team.
• Calculation of ship's tonnage
• Reviewing HSE document and fire and safety control plan.
• Reviewing P&ID, ISO lines.
• Preparation of inclining experiment test procedure and calculation for inclining weight.
• Design and development of pipe rack deck modification.
• Reviewed lower hull load out calculation, deck box lifting calculation.
• Conducted Inclining Experiment of semi-submersible. Includeing calculation and reviewing light ship weight.
Construction:
• Developing a piping insulation and protection, Hydrostatics test. Procedure and reviewing.
• Inspection on structural lifting pad before lifting blocks for assembly.
• Supervising equipment seating and foundation design and production, actual dimension check.
• Reviewing commissioning procedure according to owner requirements.
• Review of construction standards machinery installation.
• Review and approve Installation workmanship for rotating equipments.
• Owner witness for all type NDT/MT/UT/PT inspection in tank and nominated structure.
• Fit up, after welding inspection,
• Dry survey for the each block after completion.
• Damage survey for cargo discharging of OFE equipments.
• Wittiness and approval more than 180 NDT/UT/MT inspection, structural outfitting inspection (QA/QC). According to structural construction standard.
Commissioning:
• Working with MODU SPEC (USA) Team on behalf of Owner Representative.
• Reviewing field commissioning according to ModuSpec Documents.
• Involved in mechanical, piping, structural, codes and standards.
• I have assign Mechanical completion package, Marine piping system, Drilling system.
• Carried out piping hydrostatics test, flushing, re –instatement various system.
• Acting Piping Commissioning Engineer for semi submersible Marine and drilling system.
.
Software:
Auto hydro 5.3.2, Auto cad 2009, calculation excel work sheet, Catia V5,PDMS(all module).
ANSYS 11.0, Pipe Flow Expert,ect.
2007 – 2008 Hanil Engineering Co Ltd. (Yantai Raffles shipyard),China
Structural Design Engineer – Hull Outfitting, Topside and detail design of topside, Client: Baerfield Drilling Lld, Schahin Oil and Gas (Brazil )
Scope Of Work :
• Working under semi submersible new construction complete project .outfitting, machinery arrangement. Detail design. clash check ect.
• Preparation of Fire control and lifesaving plan for new building rig. Using IMO MODU code check, ABS class.
• Fire area definition plot plan, and area safety chat preparation.
• Assigning work to the team and providing guidelines related to projects.
• Design and detail engineering of Helideck landing mark and safety net arrangement.
• Concept and basic design of column embarkation vertical ladder and rest platform arrangement.
• Deck Box and drill floor detail design, and access platform, design.
• Preparation of Main towing and Emergency holding basic structural design with outfitting.(calculation supplied by basic design)
• Developing detail engineering design for rig outfitting and hull outfitting.
• Equipments and foundation detail arrangement.
• Various type of access platform and basic design of foundation as in principle design. From the rules and guidelines.
• Principle design and rules checking for arrangement and plan as a consultant (Schahin on site Representative).
• Shop drawing block weight checking and weight control.
• Shop drawing material check and reviewing.
• Developing Manhole and watertight door arrangement plan,
• Software used: PDMS 11.6 SP 3 , Auto Cad 2007,2009.Pro/E.
Calculation:
• Deep Tank and bulkhead capacity and weight calculation,
• Structural beam selection for detail design using Spread sheet calculation.
• Panel and section modulus calculation.
• Preparing Mooring arrangement and bollard capacity calculation.
• ABS,DNV deck plate buckling and stress calculating.
• Pad eye design and strength calculation ect ,.
Responsibilities:
• Contributing to effective team works and team building by working closely with other team members.
• Consultant in order to obtain technical submittal approval.
• Ensure that work progress is on track, and meeting project quality criteria.
• Ensure installation audit is carried out after project completion.
• Prepare project scope of work for Design; discuss technical and installation issues with Shipyard.
• carry out quality control checks as defined on quality plans as directed by construction superintendent and also ensure that works are carried out to these specifications.
2006 – 2007 PriServe Engineering Services, USA
Structural Designer (Oil and Gas) – Hull and deck Box
Client: Friede & Goldman, Ltd (USA)
• Basic and detail engineering of thruster foundation, fairlead, anchor rack, crane foundation and winch foundation.
Client: GustoMSC (USA-Tx) From Feb` 2007 to Aug`2007
• design and detail engineering of offshore structure platform.
• Project involved in offshore design: design and detailing of flare boom, BOP lift ring, mud tank, pre load pump structure ect. For the GlobalSantaFe.
• Design of offshore structure. Semi-Submergible, Jack-UP, Floating Wind Energy .
Client: Murphy
Semi-Submergible Name : Thunder hawk ( Hull Division)
• Towing lugs, generating shop drawing for construction. From basic design.
• Escape route and column stair case. And pump room flooring.
Client: Parker Drilling Company
Drill Ship: BP Liberty Pipe Barn.
• Accommodations module and pipe rack wall Panel design.
• Software used: PDMS 11.6 SP 3 , Auto Cad 2007
• Drawing control - Auto manager, EDMS,
2005 – 2006 Norcrane & Winch FZCO,Dubai UAE and China
Design Engineer (Marine Deck equipments)
• Handling Structural and Mechanical Design, various capacities.
• Working under crane Project with a technical support from china. Preparing production drawings from general arrangement. co-ordinate with china office and Singapore office. For the final product delivery. Handling all design documentations.
• Brake holding calculation, equipment selection
• Foundation design and calculation according to the class requirments.
• Fixed crane: 1Tonne 8 M ,2 Tone 10 M, 3 Tonne 12 M, 10Tonne 10 M, (Fixed Boom).
• Winches: 150 T,100T, 250T (Hydraulic Towing Winch) Hyd.Single drum towing Winch,Electro Hydraulic Windlass, Electro Mooring Winch tugger winch ect.
2005– 2005(4 month) Antiqua Marine Engineering, (Aries Marine) Sharjah ,UAE
Marine Designer (Ship Design).
• Preparation of ship design and production drawings. Involved in various projects.
• Making structural and calculation independent for the allotted project. Inspecting a Repair vessel in yards, and preparing class re- approval drawings like shown below.
• General Arrangement, Lines Plan, Steel Plan, Fire and Safety Plan, Piping layout and varies drawings ect.
• General Arrangement: 45T tug, 35T tug, 45000 Dwt Tanker, 65000 Bulk Carrier.
• Lines Plan : 3600 Dwt landing Craft, 2000 Dwt, Deck Loading Dumb Barge.
• Fire and Safety Plan : 45,65m,75m OSV , 65000 Bulk Carrier around 50 vessels plan reviewed.
• Structural And Piping: various type of ship piping and for and aft construction of OSV and Tankers and bulk carriers ect.
• Software used: Auto Cad 2004,AutoShip, AutoHydro, ModelMaker 5.3.2.
2004–2004(8Month) Chowgule&Co.Ltd. Ship Building.India.
Jr.Marine Designer (Ship Building)
• Incharge of design department, handling all new design & drawing,
• Developing Safety documents approval from client
• Implementation of the HSE manual and systems
• Develop Health and safety Management plan oversee implementation of the sa,e as per ISRS & OHSAS 18001,
• Conduct safety inspection/audits, Occupational health surveys and surveillance and field auditing for compliance
• Prepare daily, weekly and monthly status reports to monitor the compliance
• Develop Contractor safety Management guidelines
• Managing all company’s HSE reports to client and management reviews.
• conducting and preparation of inclining experiment and the stability calculations,
• Making the block division drawing from the basic design drawing.
• cnc nesting drawing Steel weight calculation &estimation and indenting the material for new design construction.
• Developing Docking plan. Launching calculation.
• Prepared tank volume and sounding table.
• Tonnage calculation, light ship calculation, light ship draft surveying.
• Project planning for barge delivery and detail design.
• Maintaining the ISO records, and correspondence records. All detail production drawing & approved drawings.
• Block construction and detail design for Indian Navy. Goa shipyard.
• Detail for Paradip Port Trust Fast petrol boat.
• Software used: Auto Cad 2004,Pro/E 2001,morese 2d, ms office, ms project.
Education
2007-2009 MIT School of Distance Education, Pune, India, P.G Diploma in Piping Design & Engineering (Current Education)
2003– 2004 Aries Institute of Marine Technology, Kochi,India , P.G Dip-Ing Marine Design& Drafting.
2000-2003 The Salem Co-op Sugar mills Polytechnic College
Tamil Nadu. India, Diploma in Mechanical Engineering.
Certification
Skils
Conceptual design and detail engineering of semi submersible. , hull and outfitting, deck box,
Detail design of FPSO, and marine structure.
Ship design and engineering,
Developing shop drawing and checking.
Weight control,
Safety control plan making, construction, NDT,Welding inspection.ect.
Owner representative, reviewing all the design documents and drawing, Hull structural and outfitting Detailing.5 years experience in Hull outfit /Structural Design Engineering. Worked in various project like FPSO, Semi-Submersible , Jack-up, bulk carrier, oil tankers involved in hull outfitting and basic design , detail engineering. Fully involved in detail engineering to develop the plans and arrangement and 3D modeling, volume and weight calculations. Sound knowledge in naval architecture. Work location UAE,USA.CHINA,INDIA.
Member (Royal Institution Of Naval Architects)
Associate Member (Society of Naval Architects and Marine Engineers)
Member (Indian society of technical education)
Member (The Society of Professional Engineers U.K)