Objective
Project Manager – Oil & GAS Epc Projects /
Project Management Consultant.
Experienced on the following Oil & Gas and LNG projects both Offshore – Hook Ups, Tie –Ins, Topsides, Jackets, Submarine pipelines, Offshore platforms and ONSHORE GTL Projects, Refinery / petrochemical plants, FPSO conversion, Cross Country Pipe Lines. PROFESSIONAL SKILLS
ACTIVITY:- TENDERING, PREPARE SCOPE OF WORK / FOLLOWUP TECHNICAL
CONSULTANT FOR THE PROJECT / PROJECT SITE CO-ORDINATION &
MANAGEMENT, DESIGN FOLLOW-UP,REVIEW / ERP IN-CONSTRUCTION /
CONTRACT CO-ORDINATION & MANAGEMENT / LOGISITCS /PROCUREMENT/
PROJECT CONTROL / CONSTRUCTION/CO-ORDINATION OF THIRD PARTY
SURVEY,CERTIFICATION
Experience
a) From Nov. 2007 onwards -.
Sansu Technologies - This isa consulting company for ONGC Projects in India –Worked at both Offshore & Onshore oil& Gas as Project Manager
Scope of Work :- EPC Offshore - Oil & Gas LNG PROJECTS, TOPSIDES, JACKETS - gas gathering platform, for ONGC INDIA- Equipment / piping – Fabrication / Erection / Testing, NDT and Commissioining / Handover.
Responsible for the installation, hook up and commissioning of the wellhead platform plus two conventional platforms and hand over to Operations personnel. Offshore work scope exceeded 100,000 man hours.
Manpower on Site:- Junior engineers- 50, skilled manpower- 2500, semi-skilled- 400
Worked with the same organization earlier between (2001– 2005 FEB) & (2005 AUG- 2007 JULY) as Project Incharge – Execution phase and Follow Up withthird party ertification.
b) (AUG – OCT ) 2007 - OFFSHORE & ONSHORE
Ipedex Qatar (Project for QPD Doha Qatar) & Qatar Petroleum Devlopment (QPD) Co - Project Incharge Suptd. (Mechanical Engineering Section) Offshore at platforms /Onshore at office.
Scope of work:
• Co-Ordinating with Engineering Consultants, M/s WS Atkins UAE, and other Major contractors , QPD Project Field development department, QPD Production development department, for the new project for its NEW EPC PROJECT, as well as its Second Stage Field development Hook Up for new Wells.
• Executeing Tenders / Scope of work agreement for contract, discuss commercial and technical terms of contract.terms
• Incharge of Main Contractor, Vendors, Sub-Contractors, Third Party Inspection Company, Certification agencies, Verification for Codes and Standards throughout the EPC project stage.
• De-Commissioning / Commissioning Phase of Offshore wells,
CONSULTANT Engineering Consultant for any clarification or
Modification if necessary etc.
c) 2005
Brunel Energy Qatar WLL - Oil & Gas Consultant Company as Project Inchargeofoil & gas unit of process plant Doha Qatar –Onshore .
SCOPE OF WORK:-Project Management,Coordination & Control of EPC Oil & Gas LNG PROJECTS- new equipment –Reformer reheater / piping – fabrication / erection/ testing, NDT and Commissioining/ handover.
No of manpower:- junior engineers- 40, skilled manpower- 2000, semi-skilled- 300
d) 1995 – 2001
Annai Arul Enterprise, Chennai, India - OFFSHORE & ONSHORE as Project Incharge
SCOPE OF WORK:- .-Project Management, Co-ordination & Control of EPC Oil & Gas OFFSHORE LNG PROJECTS.
Assisted by a team of 10 engineers and inspectors,I was totally responsible for all facilities,
piping, Static Equipments, and mechanical systems on the Platform(Mumbai). This was the
first offshore project handled by this Company and repair facility, which required substantial
management to achieve the required schedule and quality. Furthermore, engineering and
procurement was performed in Delhi, therefore considerable liaison was required to ensure
timely delivery of equipment and materials.
e) 1994 – 1995 :
Project System, Saudi Arabia – OIL & GAS PROJECT CONSULTANTS for ARAMCO- OFFSHORE & ONSHORE as Project Incharge, Sr. Engg. in rank
SCOPE OF WORK:- Project management,co-ordination & execution of EPC oil & gas projects -Onshore /Offshore.
Responsibilities : Based offshore during the weldout and hook up of the deck to hull, Offshore Platform installation and all non structural outfitting. Assisted by a team of 17 discipline engineers and I was responsible for directing and supervising the work force of 4 main Contractors in completing the deck to hull hook up. Peak manning levels were 350 with a total manhour content of 150,000 man hours.
Education
"Education:
Exam / Degree School/College/
University % / Grade Subjects
B.E. (Mechanical) Madurai University
College – ACCET I Class Power Plant Engineering, Production Planning & Control,
Automobile Engineering, Non-conventional Energy Resources
P.U.C American College, Madurai 71.4 % Maths , Physics, Chemistry
I.C.S.E S.D.A High School, Madurai Grade 4 to 6 Maths , Physics, Biology, Chemistry, English
Certification
CERTIFICATION :
• ASNT LEVEL II – NDT IN DPT/ MPT / RT / UT.
• STCW95 BASIC TRAINING FOR OFFSHORE PROJECTS - PST/ EFA / PSSR/ FPFF
• INDOS No-(Indian Database Number) 06ZL3405.
Skils
COMPUTER SKILLS:-
1998:-PGDCA COMPUTERS- MS OFFICE/ORACLE
PROJECT MONITORING USING-PRIMEVERA P3/ MS Projects
TYPES OF PROJECTS– OIL & GAS EPC / LNG PROJECTS –
I OFFSHORE - HOOKUP / TIE INS
a) TOPSIDES,
b) JACKETS,
c) SUBMARINE PIPELINES,
d) OFFSHORE PLATFORMS,
II ONSHORE
a)GTL Gas to Liquid Projects
b)Refinery/Petrochemical Plants Construction /TurnAround,
c)FPSO PROJECTS
d)Cross Country Pipe Lines..
Skills :-
AREA-TOPSIDES, JACKETS, SUBMARINE PIPELINES,REFINERY ,GTL- Gas to Liquid EPC Projects
a) All static equipments fabricated /erected/ tested/ commissioned:-
b) piping fabricated/erected/tested/commissioned-(TOPSIDES, JACKETS):- offshore-hook-up /onshore –oil & gas projects, piping accessories
c) site incharge for- (TOPSIDES, JACKETS) -offshore platform-hookup /
onshore GTL- gas to liquid projects etc
d)Inspection/Survey , testing & expediting-
(TOPSIDES, JACKETS,REFINERY,GTL- Gas to Liquid EPC Project)
of All STATIC AND ROTARY EQUIPMENT used in OIL & GAS PROJECTS--Inspect All Project details with reference to (Quality Control)- Inspection Standards as follows:-
pressure vessels - API 510,
fired boilers & heaters – API RP 573,
piping- API RP 574
pressure release valves – API RP 576
tank repair / inspection /alteration- API RP 653. & and other standards used are -asnt, asme and aws standards.
e)Vendor development and consultation with various CONTRACTORS (Contract Management),
f)Third party inspection co-ordiantion-(TOPSIDES, JACKETS, SUBMARINE PIPELINES,REFINERY/GTL-Projects)- Project Monitoring using computers, Implementation of technologies in New Projects.