Objective
Ensure a safe and efficient working environment, and to operate an engine room with minimum down time and maximum eficiency.
And to keep everyone happy and smiling.
Experience
Type of Machinery Description Type/Make
Main Diesel Engines/ Generators In charge of the main diesel engines on board ensuring that engines are in best running conditions.
Preparing plans for instigating repairs so as to ensure that downtime is kept to minimum.
Executing repairs or overhaul of engines as per prepared plans .
Making recommendations to chief engineer for improved performance. Detroit Diesels ,
Caterpiller ,
Deutz,Yanmar,
Wartsila,
Sulzer,
Daihatsu,MWM,Cummins,Gardeners
Dry Dock Maintenance These dry dock maintenance has been performed in shipping docks in Australia and Papua New Guinea.
This included planning jobs that needed to be performed during the ships dry dock maintenance. Working with shore personnel in all aspects of the overhaul or of all major machinery on board.
Executed installation of new machinery during this period .
Fuel Oil Lubricating Oil Purifers/Heaters This includes installation and replacement of parts. Troubleshooting and regular maintenance Alfa Laval,Westfalia,IFO,HFO
Various Pumps & Air Compressors Installation of any new pumps/compressors.
Regular maintenance and monitoring.
Air Conditioning Systems A working knowledge of air-conditioning systems as any faults with the system has to be repaired by engineers Carrier
Refrigeration Systems Monitoring of temperature on a daily basis and repairing when the need arises
Service Service Elevators Working knowledge of the operations of service elevators
Flash Evaporators /Reverse Osmosis Plant Regular maintenance and monitoring. 40/tons per day
Outboard Motors All repair and maintenance All Types/ Models
Welding Works Sound knowledge of welding works
Oily Water Separators Operations and maintenance
Sewage Plants Sound knowledge of the machinery involved and also ensuring that company, environmental statutory policies are adhered to . Airobic Type(Hammworthy)
Omnipure 150 pax capacity
Type of Machinery Description Type/Make
Inventory Control for Engine room parts & Consumables
This includes keeping records of all stock received and issued including ordering of parts when minimum quantities is reached . Ensuring that parts kept are correct. Making recommendations for the improvement of stock control.
Gas Plants A sound knowledge of LPG systems and machinery related to the transfer and carriage of LPG cargo .Maintenance of all gas plant equipment on board .
Planning Ship Pr Preventive Maintenance This includes entering data into maintenance programs . Organising work plans for subordinates. Reporting and recommending any faults or improvements to Chief Engineer. Ensuring that resources are available for any planned jobs and also ensuring that jobs are within planned timetable and costs. Amos, Masp Program
Ship Safety Management systems This includes all safety procedures documentation and work permits are adhered to with the ultimate goal being a safe and accident free environment . Writing reports of incidents and advising Chief engineer. Making recommendations on improvement of safety systems.
Laising with outside contractors This involves planning with outside contractor whenever there are jobs that need to be done by shore personnel. Being the contact person whenever the Marine surveyors are inspecting.
Education
Education
Engineer Class 2 Certificate - Hunter Institute of Technology
16th February 2003 to 5th December 2003
Newcastle, Australia
Marine Engineering Course for Engineer Class 2 Certification
Certificate Upgrade- Hunter Institute of Technology
30th July 2001 to 7th August 2001
Newcastle, Australia
STCW95 Marine Engineering upgrade to Engineer Watchkeeper Class 3
Tertiary- Fiji School of Maritime
1988 to 1992
Suva.
Stages 1 to 5 -Trade Certificate in Marine Engineering
Grade 3 -Enginner Part b/Oral Exam
Grade 4/ Grade 3 Engineer
Secondary Education
1983 to 1987
St Thomas High School,Lautoka
Fiji Junior Certificate
New Zealand School Certificate
Primary Education
1977-1982
St Thomas Primary School,Lautoka
Certification
Qualifications.
Engineer Class 2 (MOTOR). Chief Engineer under 3000kw/ Second Engineer unlimited
Cert No. AY05304,
Australian Maritime Safety Authority.
Skils
Skills
15 years working experinance with major experiences gained during dry dock maintenance periods in the overhaul of diesel engines and generators.
Skilled at troubleshooting whenever there are faults
Well versed in safety procedures.
A careful and neat worker always ensuring that the working environment is a safe and clean one.
Clean Drivers Licence.
Main Diesel Engines/ Generators In charge of the main diesel engines on board ensuring that engines are in best running conditions.
Preparing plans for instigating repairs so as to ensure that downtime is kept to minimum.
Executing repairs or overhaul of engines as per prepared plans .
Making recommendations to chief engineer for improved performance.
Carryout condition monitoring of machinery and advise Chief Engineer of possible revision of maintenance schedules and required down time. Detroit Diesels ,
Caterpiller ,
Deutz,Yanmar,
Wartsila,
Sulzer,
Daihatsu,MWM,Cummins,Gardeners
LPG Cargo Loading and offloading This includes stand by duties during offloading and loading of cargo ensuring that equipment is performing correctly. Record volumes of discharges and loading through electronic level transmitters. 10 stage deepwell pumps(Byron Jackson)
Double acting reciprocating compressor.
Fully pressurized cargo tanks.
Dry Dock Maintenance These dry dock maintenance has been performed in shipping docks in Australia and Papua New Guinea.
This included planning jobs that needed to be performed during the ships dry dock maintenance. Working with shore personnel in all aspects of the overhaul of all major machinery on board.
Executed installation of new machinery during this period.
Preparing Work plans As second engineer responsible for preparing plans for maintenance of machinery on board including setting out jobs for subordinates ensuring that job is completed within time frame . AMOS M&P
Gas Plants A sound knowledge of LPG systems and machinery related to the transfer and carriage of LPG cargo. .Maintenance of all gas plant equipment on board . 10 stage deepwell pumps(Byron Jackson)
Double acting reciprocating compressor
200bar hydraulic power unit and actuators.
Ship Safety Management systems This includes all Origin Energy safety procedures documentation and work permits are adhered to with the ultimate goal being a safe and accident free environment . Writing reports of incidents and advising Chief engineer. Making recommendations on improvement of safety systems. Attending monthly safety meetings and management meetings.
Refueling for vessel consumption Loading of diesel for own consumption for each voyage.. Documentation through origin energy bunker checklist. Regular checks of volumes and quality check through sample collection.
Calculating fuel for voyage stem and consumption monitoring
Type of Machinery Description Type/Make
Inventory Control for Engine room parts & Consumables This includes keeping records of all stock received and issued including ordering of parts when minimum quantities is reached . Ensuring that parts kept are correct. Making recommendations for the improvement of stock control.
Fuel Oil Lubricating Oil Purifers/Heaters This includes installation and replacement of parts. Troubleshooting and regular maintenance Alfa Laval,Westfalia,IFO,HFO
Various Pumps & Air Compressors Installation of any new pumps/compressors.
Regular maintenance and monitoring. Homworthy centrifugal and positive displacement pumps.
ATLAS CORPCO 6 and 30 bar air compressors.
Air Conditioning Systems A working knowledge of air-conditioning systems as any faults with the system has to be repaired by engineers Carrier, W type compressors.
Chilled water systems.
Refrigeration Systems Monitoring of temperature on a daily basis and repairing when the need arises
Flash Evaporators /Reverse Osmosis Plant Regular maintenance and monitoring. 40/tons per day
Outboard Motors All repair and maintenance All Types/ Models
Service Service Elevators Working knowledge of the operations of service elevators
Flash Evaporators /Reverse Osmosis Plant Regular maintenance and monitoring. 40/tons per day
Welding Works Sound knowledge of welding works
Oily Water Separators Operations and maintenance 15 PPM
Sewage Plants Sound knowledge of the machinery involved and also ensuring that company, environmental statutory policies are adhered to . Airobic Type(Hammworthy)
Omnipure 150 pax capacity
Planning Ship Pr Preventive Maintenance This includes entering data into maintenance programs . Organising work plans for subordinates. Reporting and recommending any faults or improvements to Chief Engineer. Ensuring that resources are available for any planned jobs and also ensuring that jobs are within planned timetable and costs. Amos, Masp Program
Laising with outside contractors This involves planning with outside contractor whenever there are jobs that need to be done by shore personnel. Being the contact person whenever the Marine surveyors are inspecting.
AMOS M&P Planned maintenance Stores and Purchasing Program Knowledge and use of a computer based program for planning/ reporting work, control and purchasing of spare gear and consumables and the issuing of contractor work orders etc. AMOS M&P
A full member of the shipboard Management and safety committee Meeting monthly to discuss operational maters/improvements to vessel operation and personnel, and safety management of personnel and equipment.