Objective
• To be able to get a good and challenging job that will maximize my skills and have it developed while learning.
• To seek for a good career and become part of a company’s progress and success.
• To be able to develop and share my skills in ship building industry.
Experience
1. HANJIN HEAVY INDUSTRIES AND CONSTRUCTION PHILIPPINES,INC (HHIC-TECH)
ENGINEERING DESIGN DIVISION
Address: Subic Shipyard, Green beach 1, Redondo, Sitio Agusuhin, Brgy. Cawag, Subic, Zambales, Phillippines
Position: Advance Design Engineer concurrent with Design Section Chief (Hull Detailed Design Part 2)
Duration: January 2011 – December 20, 2013
Position: Design Section Chief (Engine Room Department)
Duration: February 15, 2008 – January 2011
DUTIES AND RESPONSIBILITIES
DRAWING RELATED
- Checks hull production drawings based on hull construction, rule, standards and existing specification before approval for yard distribution.
- Check and coordinate with Piping Design Department, Electrical Design Department, Machinery Design Dept., and Steel Outfitting Design Department on problems relating to hull structure, reinforcement for vibration, structure penetration based on results of Finite Element (FE) Analysis and design practice.
- Assures that strict compliance of design process and methods are observed.
- Performs B.P.E (Block Process Engineering) analysis for a more efficient, safe and cost effective block assembly methodology.
- Handles hull structure related repair drawings for approval to ship-owner and classification society.
- Follow-up and resolves hull structure and hull outfitting related problems on distributed drawings.
FIELD
- Conducts regular yard patrol for design improvement and to assure that produced blocks conforms with issued drawings.
- Settle structure related comments issued by ship-owners or class surveyors and report to Yeong-do Design office.
- Performs survey on production design related problems, create revision or repair proposal and coordinate to Yeong-do Design office.
- Performs structural inspection with Quality Assurance Dept., Owner and Class if requested.
- Attend production meetings with ship-owner and classification society.
ADMINISTRATIVE
- Acts as deputy in the absence of the Part Manager.
- Staff Man-hour monitoring.
- Educate new staff on yard standard practices, and rules based on IACS (International Assoc. of Classification Society) and IMO (International Maritime Organization) regulations.
- Prepare monthly schedule and work distribution for hull Design staff.
- Make staff annual performance evaluation.
- Ensures department’s compliance with ISO.9001:2008(Quality Management System) and practice of HSE requirements.
PROJECTS HANDLED (new ship building)
- HULL NO: NCP004~6, TYPE: Container Carrier CAP: 4300TEU OWNER: CMA-CGM/ DIORYX CLASS:BV
- HULL NO: NCP007~8, TYPE: Container Carrier CAP: 4300TEU OWNER: NSC CLASS:GL
- HULL NO: NTP0013, TYPE: COT, CAP: 114K MT OWNER: KAPTANOGLU CLASS:LR
- HULL NO: NCP0016~17, TYPE: Container Carrier CAP: 3600TEU OWNER: CMA-CGM CLASS:BV
- HULL NO: NCP0026~27, TYPE: Container Carrier CAP: 12800TEU OWNER: CMA-CGM CLASS:BV
- HULL NO: NBP0061~62/ 73~74, TYPE: Bulk Carrier CAP: 180K MT OWNER: HENGHOU CLASS:NK
- HULL NO: NBP0065, TYPE: VLBC CAP: 205K MT OWNER: RIO TINTO CLASS:LR(ABS)
- HULL NO: NCP0082~85, TYPE: Container Carrier CAP: 6600TEU OWNER: ZODIAC CLASS:NK
- HULL NO: NCP0087~91, TYPE: Container Carrier CAP: 5400TEU OWNER: SMC MARITIME CLASS:DNV
- FLOATING DOCK, TYPE: Caisson CAP:15000TLC OWNER: SAMSUNG
2. GREENBEACH POWER-TECH INCORPORATED (A subsidiary of HHIC-PHIL)
Address: Subic Shipyard, Green beach 1, Redondo, Sitio Agusuhin, Brgy. Cawag, Subic, Zambales, Phillippines
Position: Ship Design Engineer (Production Design Team)
Duration: January 30, 2007 – February 15, 2008
DUTIES AND RESPONSIBILITIES
DRAWING RELATED
- To make 3D Model of Hull Structure to hull production drawing using Tribon M3 Software.
- Prepare MTO (Material Take-off) and issue BOM (Bill of Material).
- Makes block assembly drawing including information of hull outfitting installation and penetration hole.
- Makes cutting plan and bending information for piece production using X-Ginest Program.
- Distribute yard drawings to relevant department.
FIELD
- Conducts regular yard patrol.
- Attends sea trial and assist General Design Department on carrying out noise and vibration measurement.
Education
TERTIARY EDUCATION:
MAPUA INSTITUTE OF TECHNOLOGY
Bachelor of Science in Mechanical Engineering (Graduated: July, 2005)
Muralla street Intramuros, Manila, Philippines
SECONDARY EDUCATION:
LA SALLE UNIVERSITY OZAMIZ
(Graduated: March 24, 2000)
Aguada, Ozamis City, Misamis Occidental, Philippines
Certification
Skils
Proficient in Microsoft Based Applications (Word, Excel, FrontPage and PowerPoint); Proficient in Adobe Photoshop; Knowledgeable in PC troubleshooting. Proficient in using AVEVA Tribon M3 Planar and Curved Hull Modeling Software; XGinest CNC Software, knowledgeable in Auto-cad, advanced understanding in reading hull construction drawings and its elements, Understanding on how structural members react with stress and fatigue, Familiar with Finite Element Analysis, IMO, IACS Rules, SOLAS and Classification Society Rules. Also understands common shipbuilding NDT practices such as UT, MT, PT and Air testing of fillet joints.
TRAININGS/ SEMINARS
AMERICAN BUREAU OF SHIPPING
“Orientation to Classification Surveys and Engineering Training Course”
HHIC Learning Institute – Gamman-dong, Pusan, South Korea
November 27, 2006
LLOYDS REGISTER OF SHIPPING ASIA
“Shipyard Design Engineer’s Basic Training Course”
HHIC-Phil, Subic Shipyard, Philippines
October 19-21, 2009
HANJIN HEAVY INDUSTRIES AND CONSTRUCTION (HHIC-KOREA)
“Ship Building Design Training Course”
HHIC Learning Institute: Gamman-Dong, Pusan, South Korea
Position: Trainee - Ship Design Engineer (Hull Design Team)
October 30, 2006 – January 30, 2007
- Training on ship design including the ship design standards and primary concerns in ship building
- Training on the use of TRIBON M3 Ship Building Software (Curved and Planar Modeling)
- Ship Building Process of Yeoung-do Shipyard
- Use of X-Ginest Software for creating CNC Cutting Plans.
HANJIN QUALITY MANAGEMENT TEAM
SEMINAR ON:
- ISO9001-2008 Quality Management System Awareness, April 23 2012
- Key Performance Measurement, March 30,2012
- Control of Drawings, March 2, 2013
- Control of Records and Documents, April 13, 2012
- Quality Cost, April 20, 2012
- Root Cause Analysis, April 13, 2013
HHIC-Phil, Subic Shipyard, Philippines