Objective
“Once a task has began never leave it until it’s done, be the task great or small do it well or not at all”
To pursue a challenging and dynamic role in the field of electro-mechanical, electrical, electronics and communications engineering which will provide the best opportunity to further develop my skills, abilities and knowledge in a stable firm with a long term career growth possibilities.
Experience
Electrical Officer, Orient Ship Management-OSM Norway Oil/Gas/Petroleum Offshore Industry, October 14, 2005 to Present. Tel # +63 2 5238871
In cooperation with Chief Engineer, responsible for the upkeep, control and maintenance of vessel’s electrical installations, including SCADA, PLC, ROV, ship’s automation , instrumentation and DP-installations. In charge of all communication and navigation equipment onboard, periodical inspection and maintenance. To be familiar with Company system for Safety, Health, Environment & Quality Assurance, relevant documentation and Company policies. To be informed about his responsibilities and duties found on vessel’s Emergency Plan (EM-Plan). In co-operation with Chief Engineer to familiarize, to instruct and to train electrician trainees in accordance with established curriculum, and the requirements for training by the Company and the Maritime Authorities.
Electrical Engineer, Associated Ship Management Inc., General Cargo-Bulk Carrier, Intramuros, Manila, Philippines. October 2004 to June 2005. Tel # +63 2 4042780
Perform electrical and electronic services work to develop and prove methods, procedures, and equipment, evaluate define and locate design deficiencies and to accomplish special project assignments to solve problems of electronic maintenance, modification and operation. Analyze test and rejection history to identify problems and develop equipment, supply, and facility requirements for electronics work. Perform assigned duties in and around hazardous materials while maintaining a safe working environment with limited amount of supervision instruction or direction. Responsible for underway maintenance and operation of engine automation, instrumentation, communication and navigation, supervises electric power generation and distribution, and air conditioning, refrigeration and ventilation systems. Equipment includes: SCADA, PLC, SONAR, HF, VHF, RADAR, GPS, Power Plant Diesel generators with parallel switch gear, HVAC, INMARSAT, reefers, 4 sets of 25T Capacity electro hydraulic deck cranes and hydraulic hatch cover.
Electronic Engineer, Ramil Hardware and Construction, Nueva Ecija, Philippines, December 05, 2003 to October 2004. Tel # +63 44 4863691
Responsible for the installation, maintenance, service and repair of electrical related equipment such as deep well pumps, water treatment plants, vacuum pumps, heavy industry motors used for heating, ventilation and air conditioning and electric power distribution using various test and troubleshooting equipment, power meters, signal generators, oscilloscopes and volt/ohm meter, Job tasks include support of system engineers and senior technicians in the operation, troubleshooting and maintenance of various electrical and electronic equipment such as DC power supplies, RF amplifiers, modems and line drivers. Supervises the operation and maintenance of electric power distribution and generation utilizing SCADA and PLC’s. Routing and termination of copper and coaxial cables. Perform tasks associated with engineering orders and system operational procedures.
Electronic Engineer, Festival Cruises Ltd., Luxury Passenger Vessel, Marceille, France, April 2000 to December 2003. Tel # +30 210 4598560
Analyze test and rejection history to identify problems and develop equipment, supply, and facility requirements for electronics work. Perform assigned duties in and around hazardous materials while maintaining a safe working environment with limited amount of supervision instruction or direction. Supervises the operation and maintenance of electric power distribution and generation. Responsible for underway maintenance and repair of electronic and communication related equipment such as Close Circuit Television, SCADA, Programmable Logic Controls (PLC), automation, instrumentation , PABX Telephone System, Engine Automation by Alstom, Broadcast and Public Address System, Theater Lightings, Audio and Video System, Fire Detection System, Gyrocompass, GMDSS, Radar, ARPA and Mc Gregor Ship’s Elevators. All works performed in marine environment international ocean going passenger vessel.
2ND Master Electrician , Magsaysay Maritime Corporation, General Cargo-Bulk Carrier, Manila, Philippines, July 1998 to July 1999. Tel # +63 2 5268888
Conduct electronic and electrical services work to develop and prove methods, procedures, and equipment, evaluate define and locate design deficiencies and to accomplish special project assignments to solve problems of electronic maintenance, modification and operation. Responsible for underway maintenance and repair of communication and navigation, automation, instrumentation, electric power generation and distribution, and air conditioning, refrigeration and ventilation systems. Equipment includes: SCADA, PLC, SONAR, HF, VHF, RADAR, GPS, Power Plant Diesel generators with parallel switch gear, HVAC, INMARSAT, 4 sets of electro hydraulic 25T capacity deck cranes.
Service Engineer, Philippine Laboratories, Makati , Philippines, October 1997 to April !998. Tel # +63 28908277
Service, calibration, installation, maintenance and repair of laboratory instruments and related support equipment, including water purification and de-ionization systems, compressors, autoclaves, bio-freezer and vacuum pumps. Product line includes: Cole-Parmer (U.S.) measurement and control instruments, TECATOR (Sweden) moisture analyzer, RETSCH (Germany) Laboratory mills, JASCO (Japan) spectrophotometers, and JEOL (Japan) Electron microscope.
Instrument Technician/Electrician, Octavo Heavy Industries, Severino Reyes, Manila, Philippines, October 10, 1990 to August 01, 1995. Tel. # +63 2 2588162
Responsible for the installation, maintenance, service and repair of electrical related equipment such as deep well pumps, water treatment plants, vacuum pumps, heavy industry motors used for heating, ventilation and air conditioning and electric power distribution using various test and troubleshooting equipment, power meters, signal generators, oscilloscopes and volt/ohm meter. Utilizing SCADA and PLC. Job tasks include support of system engineers and senior technicians in the operation, troubleshooting and maintenance of various electrical and electronic equipment such as DC power supplies, RF amplifiers, modems and line drivers. Routing and termination of copper and coaxial cables. Perform tasks associated with engineering orders and system operational procedures.
Education
Bachelor of Science in Aviation Major in Electronics and Communications Engineering, Philippine Air Transport and Training School, College of Aeronautics, Pasay City, Manila, Philippines, March 17, 1997
Certification
Basic Offshore Safety Induction and Emergency Training-OPITO Approved, Consolidated Training Systems Incorporated, Manila, Philippines, February 2007
Registered Master Electrician and Electronic Engineer, Professional Regulation Commission, Philippine Overseas Employment Agency Approved, Manila, Philippines, August 09, 1998.
International Safety Management Code and Seafarers Training, Certification and Watch Keeping Code, The OSM Group, Manila, Philippines, March 2006
Marlins English Language Test, The OSM Group, Manila, Philippines, October 07, 2005
Protection and Environment (IMO) Course, The OSM Group , Manila, Philippines, March 02, 2006
Human Relationships, The OSM Group, Manila, Philippines, March 09, 2006
Crane Operator Course, Intership Navigation Training Center, Quirino, Manila, Philippines, October 07, 2004
Gantry Crane Course, Westfal-Larsen Management Norway, Ermita, Manila, Philippines, December 05, 1997
Crowd and Crisis Management Course, Piraeus Maritime training Center, Piraeus, Greece, March 13, 2002
Security and Surveillance, Technical Team, European Vision, Genoa, Italy, G8 Summit 2001
Advance Training in Fire Fighting, The Maritime Training Center of the Philippines, Malate, Manila, Philippines, November 1999
Advance Proficiency in Survival Craft and Rescue Boat, The Maritime Training Center of the Philippines, Malate, Manila, Philippines, November 1999
Advance First Aid-Medical Emergency, The Maritime Training Center of the Philippines, Malate, Manila, Philippines, November 1999
Prevention of Alcohol and Drug Abuse in the Maritime Sector, The Maritime Training Center of the Philippines, Malate, Manila, Philippines, November 1999
Safety Courses in Personal Survival, Fire Prevention and Fire Fighting, First Aid and Personal Safety and Social Responsibility, Admiral Maritime Training Institute of the Philippines, Sta. Cruz, Manila, Philippines, August 1999
International Safety Management Code and Seafarers Training, Certification and Watch Keeping Code, Magsaysay Institute of Shipping, Cavite, Philippines, July 1999
Safety Course in Medical Emergency, Personal, Survival and Fire Fighting, Philippine Seafarers Training Center, Manila, Philippines, January 1998
Personal Safety and Social Responsibility, Philippine Seafarers Training Center, Manila, Philippines, February 1998
Skils
More than 10 years of international working experiences in the field of electrical engineering, all works performed in the maritime deep sea sector and offshore industry (ROV, Research, Survey, AHTS vessels) and land based job. Ability to work from engineering drawings, schematics, circuit or system diagrams, equipment specifications, technical information and design, manufacturing records and other written or verbal information with limited amount of supervision. Can read and interpret engineering drawings. Perform electrical and electronic assembly work to complete work assignment. Can use and operate shop tools. Perform tests, installation, calibration and troubleshooting using various computer systems, power supplies and meters of various types. Utilizing Planned Maintenance System programs including AMOS. Computer literate and numerate such as Microsoft Office. Understand electronic circuits, make printed circuit layouts. Knowledgeable in Supervisory Control and Data Acquisition - SCADA, Programmable Logic Controls (PLC), instrumentation and engine automation such as Wartsila WECS, Kongsberg Dynamic Positioning II and mechanical equipment, relief valves, control valves, flow, level, temperature, pressure, analytical, heavy industry motors, hydraulic equipment. With relevant work experiences in power plant diesel engines. Supervises the operation and maintenance of electric power distribution and generation. Effectively communicate verbal information such as tie-ins and job related information to lead technicians, floor supervisor, safety, manufacturing engineer, and task leaders with compliance to relevant rules and regulations in accordance to the company Health, Safety, Environment & Quality Assurance.
Institute of Integrated Electrical Engineers of The Philippines Member, Professional Regulation Commission Accredited License # 0021591
G8 Genoa Summit 2001 Shipboard Electronic Engineer, M/V European Vision-Passenger Luxury Vessel, Engine Department, Genoa, Italy
Alstom SCADA/PLC Trainee, Engine Department, Festival Cruises Ltd. Sponsored, Nantes, Saint Nazaire Shipyard , France. May 17, 2001 – July 01, 2001