Objective
To be able to upgrade my working experience by joining a prestigious company in the future
Experience
Company : Malaysia Marine and Heavy Engineering
81707 Pasir Gudang
Johor, Bahru Malaysia
Project : Ruby FPSO Topsides PCVL Onshore
Year : 2009 January – Present
Position : ELECTRICAL SUPERVISOR / PMT
Duties & Responsibilities
• Monitor Daily Weekly/Monthly Progress Generate Daily/Weekly/Monthly Activity Report as per Project Specifications.
• Coordinate with other Discipline.
• Attend Daily PTW Meeting.
• Supervision of Switchgear and Switchboard Installation including Cable Pulling, Glanding & Termination.
• Coordinate with Engineering Regarding Revision Drawings and as Built Drawing.
Company : Ramunia Fabricators Sdn. Bhd
Lot 437 Teluk Ramunia Fabrication Yard
Pengerang Johor, Malaysia 81620
Project : ANGSI- D/ANDP-A Onshore
Year : 2008 September – 2009 January
Position : ELECTRICAL COMMISSIONING SUPERVISOR
Duties & Responsibilities
• Preparation of Check sheet / Check sheet Overview for all Electrical System.
• Monitor & Update Pre-Comm. & Comm. Daily /Weekly/Monthly progress and Generate Daily/Weekly/Monthly Activity Report.
• Supervised & Execute Pre-Comm. & Comm. Activities as per Assigned Electrical System Testing & Commissioning Activities.
• Pre-Comm. & Comm. of 2 Units 200 KW Dual Fired Micro Turbine Generator.
• Pre-Comm. & Comm. of 180 KW. Emergency Diesel Generator.
Company : Ramunia Fabricators Sdn. Bhd
: Lot 437 Teluk Ramunia Fabrication Yard
Pengerang Johor, Malaysia 81620
Project : East Belumut A Onshore/Offshore
Year : 2007 January – 2008 August
Position : ELECTRICAL COMMISSIONING SUPERVISOR
Duties & Responsibilities
• Schedule Commissioning Activities & prepare Work permit for Electrical Commissioning Discipline.
• Coordinate with Design Engineering & Sub Contractors Regarding Revision Drawings.
• Commissioning of 3.3 K.V Switchgear and 400 Volts Motor Control Center.
• Pre Commissioning & Commissioning of 3 Units 1000 KW Dual Fired Gas Turbine Generator.
• Pre Commissioning & Commissioning of 3.3 K.V Dry Type Transformers.
• Attend Daily Progress Meeting and PTW Briefing.
• Coordinate with other Discipline Regarding Comm. Activities Involving Electrical Works.
Company : Ramunia Fabricators Sdn. Bhd
Lot 437 Teluk Ramunia Fabrication Yard
Pengerang Johor, Malaysia 81620
Project : F-13 East Shell Onshore / Offshore
Year : 2006 July – 2007 January
Position : ELECTRICAL COMMISSIONING SUPERVISOR
Duties & Responsibilities
• Commissioning of Various Motors from 90 KW to 2.5 KW and Termination of Power and Control Cables.
• Hi pot of High Voltage Power Cables and Meggering of Low Voltage Power Cables and Control Cables.
• Bus Ducter Test of Bus Bar Connection and Splice using Digital Micrometer.
Company : Atlantic Gulf and Pacific Company (AG&P)
SEIC LUNSKOYE
Sakhalin Russia Offshore
Project : SEIC LUNSKOYE A Project
Year : 2005 July – 2006 January
Position : ELECTRICAL COMMISSIONING SUPERVISOR
Duties & Responsibilities
• Commissioning of Various Motors from 90 KW to 2.5 KW and Termination of Power Control Cables.
• Hi pot of High Voltage Power Cables and Meggering of Low Voltage Power Cables and Control Cables.
• Bus Ducter Test of Bus Bar Connection and Splice using Digital Micrometer.
Company : Atlantic Gulf and Pacific Company (AG&P)
Daewoo Shipbuilding & Marine Engineering (DSME)
Cabinda, Angola West Africa Offshore
Project : Chevron / Benguela Belize Development Project
Year : 2005 June – 2005 October
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Ducter Test of Medium Voltage and Low Voltage Bus bar Joints and Splices.
• Involved in Pre Commissioning and Commissioning of High Voltage and Medium Voltage Switchgears and Motor Control Centers.
• Pre Commissioning and Commissioning of Low Voltage Motors and Motor Control Centers according to Specifications.
• Hi-pot Testing of Medium Voltage X-formers and Medium Voltage Cables.
Company : Atlantic Gulf and Pacific Company (AG&P)
Daewoo Shipbuilding & Marine Engineering (DSME)
Cabinda, Angola West Africa Offshore
Project : Chevron / Sanha Condensate Complex Project
Year : 2004 March – 2004 October
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Assisted Vendor to Execute Comm. Activities for the Following:
• Turbine Generator (6.6 KV)
• Emergency Diesel Generator
• High Voltage Switchgear
• Integrated Motor Control System ( IMCS)
• Load Shedding System (LSS)
• Electrical Management System (EMS)
• Emergency Shutdown System (ESS)
• Supervise Continuity Check and Megger Check of Cable Spools and Inspection of Cable Trays and Supports prior to Cable Pulling.
• Installation, Cabling and Commissioning of Solid State Battery Chargers and Inverters according to Drawings and Specifications.
• Installation, Cabling and Commissioning of Monorails and Over Head Cranes.
• Pre Commissioning and Commissioning of Medium Voltage Motors and Switchgears.
• Pre Commissioning and Commissioning of Low Voltage Motors and Motor Control Centers.
• Supervise Termination of High Voltage X-formers and Motor from Switchgears and Motor Control Centers.
Company : Mestika Yakin Sdn. Bhd.
(Malaysia Shipbuilding & Engineering)
Pasir Gudang, Johor Bahru, Malaysia
Project : Helang Integrated Topsides Onshore
Year : 2002 June – 2003 May
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Involved in Pre Commissioning and Commissioning of Medium Voltage Motors and Motor Control Center.
• Pre Commissioning and Commissioning of Low Voltage Motors and Motor Control center.
• Line check and Megger check of Power and Control Cables prior for Terminations.
• Hi-pot Testing of Medium Voltage X-former and Medium Voltage Cables prior for Energization.
• Ducter Test of Medium Voltage and Low Voltage Bus bar Connections.
Company : Atlantic Gulf and Pacific Company (AG&P)
Daewoo Shipbuilding & Marine Engineering (DSME)
Cabinda, Angola West Africa
Project : Chevron / North Nemba Platform Offshore
Year : 2001 March – 2001 December
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Involved in HUC & Supervise Execution of Pre-Comm. / Comm. Activities.
• Hi-pot Testing of High Voltage Power Cables and Switchgears.
• Line Checking and Meggering of Low Voltage Power and Control Cables.
• Meggering of Low Voltage Motors and Space Heaters prior for Energization.
Company : Atlantic Gulf and Pacific (A.G. & P.)
Daewoo Shipbuilding & Marine Engineering (DSME) Cabinda, Angola West Africa
Project : Kungulo Water Injection Platform Offshore
Year : 2000 January – 2000 April
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Supervise Cable pulling, glanding and terminations of High Voltage Cables from Motor to Switchgear or Motor Control Centers as per Manuals and Specifications.
• Involved in Commissioning of High Voltage Switchgear and Motor Control Centers.
• Line checking and Meggering of Low Voltage Power and Control Cables.
• Testing and Commissioning of emergency Power Generators and Turbine Generators.
• Illumination Check of Lighting System on certain locations.
Company : Atlantic Gulf and Pacific Company (AG&P) Daewoo Shipbuilding & Marine Engineering (DSME) Cabinda, Angola West Africa
Project : Chevron / South Nemba and Lomba Platforms
Offshore
Year : 1998 January – 1998 May
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Executed Pre Commissioning & Commissioning Activities for the Following Equipments.
• LV Switchgears, Switchracks.MCC & Distribution Boards, Transformers.
• UPS, Battery Chargers & Batteries.
• Lightings.
• Navigational Aids & Radar Beacon.
• Electric Heaters & Heat Tracing.
• Motor & Starter (soft starter & D.O.L).
• Earthing System.
Company : Atlantic Gulf and Pacific Company (AG&P)
Batangas Fabrication Yard
Project : Shell Refinery Batangas Philippines
Year : 1996 - 1997
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Execution of the Following Commissioning Activities.
• Megger Testing of Electric Motors and Cables.
• Loop Checking and Meggering of Power Cables.
• Replace Revise Motor Control Starter and Overload Relays as per Specifications.
• Function Test of Motor Starter & Remote Control Units.
Company : Atlantic Gulf and Pacific Company (AG&P)
Batangas Fabrication Yard
Project : Enron Project / 80 Man Living Quarters
Year : 1995
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Conduit Bending and Installation.
• Installation of Support for Conduit and Lightings.
• Cabling and Termination of Instrument Cables.
• Pre Commissioning and Commissioning of Fire and Gas Paging System.
Company : Atlantic Gulf and Pacific Company (AG&P)
Daewoo Shipbuilding & Marine Engineering (DSME) Bombay High, India
Project : ONGC-SHW Project Offshore
Year : 1994 - 1995
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Execution of the Following Commissioning Activities.
• Test Run of 3 Units Medium Voltage Seawater Lift Pump.
• Test Run of 4 Units Medium Voltage Crude Oil Export Pump.
• Energization of 5 Units Medium Voltage Transformer.
• Battery Charge & Discharge Test for UPS.
• Start up & Commissioning of LV/MV Switchgear.
• Load Test of 3 Units 3.3 KV Gas Turbine Generator.
Company : Atlantic Gulf and Pacific Company (AG&P)
Daewoo Shipbuilding & Marine Engineering (DSME)
Bombay High, India Offshore
Project : ONGC-SHG 7 Gas Compression Modules
Year : 1993
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Assist Vendor Rolls Royce in Commissioning of 3 Units 6.6 KV. Turbine Generator.
• Power Up 24 V Control Circuit & Function Test the Switchgear.
• Power up LV Switchgear via Temporary Power Generator & perform Load Testing.
• Hi Potential Test on Switchgear Bus bar & MV Cables.
• Die-Electric Test & Hi-Potential Test of MV Transformers.
• Earth Loop Impedance Testing (Current Injection Method) on Overall Earthing Network.
• Polarization Index Test on MV Motors & Generators.
• Illumination Test for lightings.
• Battery Charge & Discharge test.
Company : Atlantic Gulf and Pacific Company (AG&P)
Daewoo Shipbuilding & Marine Engineering (DSME)
Project : NKK – ICG Platform – Bombay High, India Offshore
Year : 1990-1992
Position : ELECTRICAL COMM. SUPERVISOR
Duties & Responsibilities
• Supervision of the Following Commissioning Activities.
• Pre-Commissioning & Commissioning of Electrical Controls and Instruments.
• Meggering and Loop Checking of Power and Instrument Cables.
• Installation & Pre-Commissioning of Alimak Elevator ICG Platform.
• Pre-Commissioning & Commissioning of Electrical Motors and Controls.
Company : Atlantic Gulf and Pacific Company (AG&P)
Batangas Marine & Fabrication Yard
San Roque, Bauan, Batangas
Project : Logistics Department (Electrical Repair Section)
Year : 1988 – 1989
Position : ELECTRICAL TECHNICIAN
Duties & Responsibilities
• Repair and Trouble Shooting of Engine Drive, Welding Machines and AC Drive Welding Machines and Rectifier Types.
• Wiring Installation of 40 tons – 60 tons Arrol Crane.
• Trouble Shooting of AC Generators.
• Repair of Power Tools such as Portable Grinders and Electrical Drills.
• Excavation and Installation of PILC Cables at Load Centers and Portable Distribution of Panel.
Company : Atlantic Gulf & Pacific Company (AG&P)
Batangas Marine & Fabrication Yard
San Roque, Bauan, Batangas
Project : Logistics Department
Electrical Repair Section
Year : 1986 – 1988
Position : ELECTRICAL TECHNICIAN
Duties & Responsibilities
• Automotive Electrical Maintenance.
• Rewind of Exciter Field and Armature.
• Rewind of Transformers and Holding Coil.
• Trouble Shooting of Yard Communication System.
• Electrical Maintenance at Union Oil of Thailand (UOT) Project.
Company : Atlantic Gulf & Pacific Company (AG&P)
Batangas Marine & Fabrication Yard
San Roque, Bauan, Batangas
Project : Logistics Department
Electrical Repair Section
Year : 1985 – 1986
Position : ELECTRICAL TECHNICIAN
Duties & Responsibilities
• Yard and Building Electrical Maintenance.
• Trouble Shooting of Tower Cranes and Overhead Cranes.
• Repair and Trouble shooting of Welding Machines.
Company : Atlantic Gulf & Pacific Company (AG&P)
San Roque, Bauan, Batangas
Project : Yard Development
Year : 1983 – 1985
Position : ELECTRICAL TECHNICIAN
Duties & Responsibilities
• Excavation of PILC Cables from Substation to Load Centers.
• Termination & Splicing of PILC Cables.
• Install Electrical Wirings at Fabrication Shop.
• Install Pole Mounted Transformers at AG&P Barracks.
Company : Atlantic Gulf & Pacific Company (AG&P)
Poro Point, San Fernando, La Union
Project : Tiong “A” Project
Year : 1982 – 1983
Position : ELECTRICAL TECHNICIAN
Duties & Responsibilities
• Installation of Electrical Support and Cable Trays.
• Bending and Installation of Electrical Conducts.
• Cable Pulling & Termination.
• Installation of Motors and Controllers.
• Fabrication of Lightings and Conduit Support.
Company : Atlantic Gulf & Pacific Company (AG&P)
Steel Marine Structure Group
Poro Point, San Fernando, La Union
Project : Bekok “C” Project for Malaysia (EPMI)
Year : 1980 – 1982
Position : ELECTRICAL TECHNICIAN
Duties & Responsibilities
• Industrial Electrician.
• Substation Tender.
• Repair and Trouble Shooting of Welding Machines.
Education
Vocational Northern Luzon Technical Institute
1977 - 1980 2 Years Practical Electricity
San Fernando City, La Union
Secondary La Union National High School
1972 - 1975 San Fernando City, La Union
Elementary Catbangen Central School
1966 – 1972 San Fernando City, La Union
Certification
Skils
• More than 24 years experience in the Construction Works of Oil and Gas Refinery.
• Assigned on the Fabrication and Installation, Hook Up and Commissioning of Electrical and Instrumentation Works particularly On-shore and Off-shore and able to interpret Construction Drawings regarding Electrical and Instrument Installations and Manuals Knowledge in High Voltage Terminations for 13.8kV and 4160 V or 4.5 kV using Raychem Termination Kit, Computer Literate ( Microsoft Word, Excel, & PowerPoint ).
• Bosiet, Huet, Basic Firefighting and CPR with Certificate.