Objective
I'm interested on Engineering and Supervision of Oil and Gas Marine and Offshore projects
Experience
EMPLOYMENT HISTORY
November 2005 to the present, Sr. Electrical & Instrumentation Engineer Belanak LPG FSO Project; ConocoPhillips Indonesia; Singapore
Assist and advise the LPG FSO Engineering and Fabrication Manager in all aspects of
Project management as necessary.
Review and approve Contractor’s design, engineering documents and drawings of electrical
and instrumentation systems.
Interface with Operations for input into design and testing of all systems.
Provides support to QA/QC engineer during design, conversion and fabrication phases of
the LPG FSO.
Ensure proper resolution of interfaces between the LPG FSO electrical and instrumentation
systems and the FPSO and Mooring system, primarily related to LPG-FSO power supply
and power management, LPG FSO operations monitoring, safety and ESD systems
performance monitoring and communications.
Review and approve Contractor furnished drawings and specifications.
Review all procedures necessary to manage the electrical and instrumentation scope of
work both technically and contractually.
Interface with the other LPG FSO disciplines.
Review and approve Contractor “Approved for Construction” electrical drawings.
Review and approve vendor bids for “estimated sums” compiled by the Contractor.
Monitor and supervise the LPG-FSO fabrication activities by Contractor.
Follow-up and verify that the installation of electrical systems are in accordance with
engineering drawings and specifications and equipment manufacturer requirements.
Responsible for the testing of all electrical and instrumentation equipment. Attend vendors
technical meetings and equipment FAT’s.
Monitor and supervise the implementation of Contractor’s safety and quality control
systems during the fabrication, testing and commissioning activities as they relate to the
electrical and instrumentation systems.
Review material and equipment certification compiled by the Contractor.
Review change order requests.
Witness testing of systems and equipment.
Review and approve all documentation prepared by Contractor and required by the contract.
Review and approve all “As Built Drawings”.
Witness and approve the testing, commissioning and placing in service all of the electrical
equipment and instrumentation systems.
Assist with the delivery process of the LPG FSO facility to the Operations Group
Interim LPG FSO on place and Permanent LPG FSO in design Phase
NOTE*
December 2008 To March 2009 Temporary assignment in Qatar Gas LNG Project; DSME shipyard (Korea) as Lead Electrical Inspector
Primary functions and responsibilities:
Assist and Advice to the Project team on the Sea & Gas trial for equipment and system testing and commissioning
Responsible of testing all electrical systems, Power Generation, Power distribution (6.6KV, 440V, 220V and 24V). Instrumentation & Control, Power Management, El cargo equipment, Cargo control & monitoring systems, Cargo Gas Refrigeration and Reliquefaction Plant, Navigation & Communication equipment
August 2002 – November 2005 Lead Marine Electrical Specialist for Corocoro FSO Project; Marine; ConocoPhillips; Houston and Samsung shipyard (Korea)
Design Lead electrical engineer Corocoro FSO project.
Power system,
Power management System
Control & Monitoring system
Cargo & Ballast Control and Monitoring System
Refrigerating & air conditioning system,
Navigation system & Communication systems
Review of drawings contract and Specifications.
Inspect machinery at shipyard prior to installation onboard vessel
Inspection of electrical installation equipment and electrical cable, during shipbuilding at
shipyard
Attendance of Shop tests electrical equipment
Attendance of sea trial
Maintain high quality control during installation and commissioning
Deliver FSO on time and Budget
July 2001 – August 2002 Lead marine Electrical specialist Seahorse Shuttling & Technology; Marine; ConocoPhillps; Houston and Samsung (Korea)
Design Lead electrical engineer GOMAX project
Power system
Power management System
Control & Instrumentation system
Dynamically positioning system
Thrusters system
Cargo & Ballast Monitoring System
Refrigerating & air conditioning system
Navigation & Communication systems
Review of drawings, contract and Specifications.
Design the Engine room and equipment in Mega modules
April 1999 – July 2001 Electrical engineer advisor for Drillships Deepwater Pathfinder and Deepwater Frontier; Marine; ConocoPhillips;
Advises Chief Engineer on subjects related to vessel's electrical systems and vessel's
construction.
Assists Chief Engineer with the verification, lining and starting up of all main and auxiliary
drilling systems, in preparation to the first drilling operation in the GOM.
Assists Chief Engineer with the implementation of the Planned Maintenance Program,
Electrical part, on board.
Assists Chief Engineer with the installation and starting up of the vessel's Technical library
Electrical part, that consists in: Blue Prints, Technical Records, Manufacturers Instruction
Books and Files.
Consults with Chief Engineer and vessel's Chief electrician in order to conduct an analysis
for spare parts inventory levels for electrical equipment and makes recommendations
accordingly
Advises Chief Engineer on electrical matters as required.
Supports and participates actively in vessel's Safety and Environmental Programs.
Consults with OIM and Drilling operations personnel as required to become fully acquainted
with all drilling associated activities.
Review and modify preventive maintenance
Create procedures for HV system maintenance without operation down time
May 1996 – April 1999 Electrical Supervisor for DP3 D/El. Drillships; ConocoPhillips; Houston and Samsung Shipyard (Korea)
Advice to fabrication marine engineer on the design of :
Power generation and distribution system
Electrical Propulsion Azimuth Thrusters & control
Control, monitoring and power management system for DP 3 class
Design of agronomic and integrated bridge navigation system
Review drawings and contract specifications
Inspect machinery at shipyard prior to installation onboard vessel
Inspection of electrical equipment installation and electrical cable during shipbuilding at
shipyard. Attendance of Shop tests electrical equipment and sea trial
Maintain high quality control during installation and test
Deliver Drillships on time and budget
March 1994 – May 1996 Electrical supervisor for DP 2 type D/El. Shuttle Oil tanker Rangrid; Marine; ConocoPhillips; Houston and Samsung shipyard (Korea)
Review of drawings and contract specifications
Advice to fabrication marine engineer on the design of :
Power generation and distribution system
El. Propulsion and control
Tunnel Thrusters and control
Control, monitoring and power management system for DP 2 class
Design of agronomic and integrated bridge navigation system
Inspect machinery at shipyard prior to installation onboard vessel.
Inspection of installation of electrical equipment and electrical cable during shipbuilding at
shipyard.
Attendance of Shop tests electrical equipment and sea trial
Maintain high quality control during installation and test
Deliver ship on time and budget
September 1991 – March 1994 Electrical supervisor, Double Hull Oil Tankers Project; Marine; ConocoPhillips; Houston and Samsung shipyard (Korea)
Review of drawings and contract specifications
Advice to fabrication marine engineer on the design of:
Power generation and distribution system.
El. Propulsion and control. Tunnel Thrusters and control
Control, monitoring and power management system for DP 2 class
Navigation & Communication system
Inspect machinery at shipyard prior to installation onboard vessel.
Inspection of installation of electrical equipment and electrical cable during shipbuilding at
shipyard.
Attendance of Shop tests electrical equipment and sea trial
Maintain high quality control during installation and test
Deliver vessels on time and Budget
November 1989 – September /1991 Electrician Engineer Officer; Marine; ConocoPhillips; Onboard ship
Manage ship’s electrical plant operation.
Electrical Circuitry
Pneumatic & Hydraulic system maintenance
Control & Instrumentation maintenance
Navigation & Communication equipment maintenance
Responsible for safe and efficient operation of the above equipment, to ensure proper function
Maintain Ship at 100% Electrically operational
March 1973 – November 1989 Electrician Engineer Officer; Trinidad Corporation / Maritime Overseas / Total / Utha Shipping / Gotas Larsen
Manage ship’s electrical plant operation
Electrical Circuitry
Pneumatic & Hydraulic system maintenance
Control & Instrumentation maintenance
Navigation & Communication equipment maintenance
Responsible for safe and efficient operation of the above equipment to ensure proper function
Maintain ship at 100% electrically operational
1968 to 1973 Electrician Engineer: A.S.E.A. Astilleros Espanoles (Bilbao)
Primary functions and responsibilities:
Responsible for installation of electrical cables and Equipment
Responsible for installation of Navigation equipment and Radio communication system
Responsible for installation of Control systems
Testing and commissioning electrical power equipment
Testing and commissioning Control & instrumentation system, Navigation equipment and Radio Communication
Attendance of sea trials
Education
Electrician Engineer by Euskalduna shipyard (Astilleros Espanoles)Technical school
Different training curses as listed in Certifications
Lenguages
Spanish, English, French (elementary)
Certification
Certificate of Electrician Bilbao, Spain, December 27, 1968
Seminar of Electro technology Naval Portugalete, Spain, February 23, 1979
Certificate of Competence of Marine Merchant Bilbao, Spain, July 27, 1984
Seminar of Safety and Engineering Management. Gijon. Spain, July 20, 1990
ABS Certificate Qualified welding Inspector Houston, Texas January 22, 1994
Training Course of Cyclo driven diesel electric propulsion Helsinki, Finland, January 27, 1994
Seminar of Safety, Environmental and Quality Insurance Gijon, Spain, June16, 1995
Certificate of Sea Survival Level I Gijon, Spain, June 2, 1995
Certificate of Fire fighting Level I Gijon, Spain, June 2, 1995
Certificate of Sea Survival Level II Gijon, Spain, June 9, 1995
Certificate of Fire fighting Level II Gijon, Spain, June 9, 1995
Training Course of Power Generation and Distribution Sys Geoje, South Korea, August 31, 1998
Certificate of Helicopter Evacuation and Sea Survival. New Plymouth, New Zealand. May 3, 1999
Training Course of GE Toolbox for frequency drives Salem, Virginia, May 07, 2001
Seminar of Behavioral observation Geoje, South Korea, February 6, 2004
ABS LNG Carriers Training Course Geoje, South Korea, June 17, 2005
Basic Offshore Safety Induction and Emergency Training Singapore August 16, 2006
Gas Processing and Process control engineering Jakarta, Indonesia, September 5, 2008
Skils
Marine electrical specialist with 16 years (1973 to 1989) of sailing experience, in Oil tanker vessels, Chemical tanker vessels, Bulkarrier vessels, OBO vessels, LNG tanker vessels and LPG tanker vessels. In addition, 18 years (1991 to the present) of experience in Marine engineering and construction projects such as, Oil tanker vessels, Diesel electric DP 2 Oil shuttle tanker vessels, Diesel electric DP3 Deepwater drillships, FSO, LPG FSO.
Good and fluent communication with different cultures, having worked in countries like USA, South Korea, Indonesia and having traveled all around of Europe, USA, Canada, South Korea, for equipment FATs and supervision of equipment fabrication